How To Change Ink Cartridge Canon Pixma 3620

Replacing a FINE Cartridge

When remaining ink cautions or errors occur, the ink lamps and the Alarm lamp will flash to inform y'all of the error. Count the number of flashes and take appropriate action.

An Mistake Occurs

Annotation

For precautionary notes on handling FINE cartridges, run into Notes on FINE cartridges.

Replacing Process

When you demand to replace a FINE cartridge, follow the procedure below.

Make certain that the power is turned on, then open up the front embrace (A) and the paper output tray (B).
Open the newspaper output embrace (C).

When the FINE cartridge holder moves to the replacement position, the caput cover (D) OPENS AUTOMATICALLY.

Caution
- Do non hold the FINE cartridge holder to cease or motion it forcibly. Do not touch on the FINE cartridge holder until it stops completely.
Important
- The caput cover will open automatically after y'all open the newspaper output embrace. If you have airtight the head cover while replacing a FINE cartridge, close the paper output cover, then open up information technology again. Trying to force open the caput cover with your hand may cause the auto to malfunction.
- Do non affect the metallic parts or other parts within the automobile.
- If the paper output cover is left open for more than than 10 minutes, the FINE cartridge holder moves to the far right and the Alarm lamp lights. In this case, shut the paper output cover, and so open it over again.
Push down the ink cartridge lock lever of the empty FINE cartridge until information technology clicks.
Remove the FINE cartridge.

Important
- Handle the FINE cartridge carefully to avert staining of vesture or the surrounding expanse.
- Discard the empty FINE cartridge according to the local laws and regulations regarding disposal of consumables.
Take a new FINE cartridge out of its parcel and remove the protective record (E) gently.

Important
- If you shake a FINE cartridge, ink may spill out and stain your hands and the surrounding expanse. Handle a FINE cartridge carefully.
- Be careful non to stain your hands and the surrounding area with ink on the removed protective record.
- Do not reattach the protective tape once y'all have removed it. Discard it according to the local laws and regulations regarding disposal of consumables.
- Practise non affect the electrical contacts or print head nozzle on a FINE cartridge. The machine may not impress properly if you touch them.
Insert the new FINE cartridge straight into the FINE cartridge holder all the manner until it touches the back.

The color FINE cartridge should be installed into the left slot and the blackness FINE cartridge should be installed into the right slot.

Important
- Insert the FINE cartridge gently so that it does not hit the electrical contacts on the FINE cartridge holder.
Push up the ink cartridge lock lever to lock the FINE cartridge into identify.

The FINE cartridge is locked into place when the ink cartridge lock lever clicks.

Important
- Bank check if the FINE cartridge is installed correctly.
- The machine cannot impress unless both the color FINE cartridge and black FINE cartridge are installed. Be certain to install both cartridges.
Close the newspaper output cover.

Note
- If the Alarm lamp lights or flashes later on the paper output cover is closed, have advisable action.
  - An Mistake Occurs
- When you kickoff printing after replacing the FINE cartridge, the motorcar starts cleaning the print head automatically. Exercise not perform whatever other operations until the car completes the cleaning of the print caput.
- If the print head is out of alignment, equally indicated by misaligned printed ruled lines or similar symptoms, align the impress caput.
- The automobile may make noise during operation.

Notes on FINE cartridges

Important

Do not touch the electrical contacts (A) or print head nozzle (B) on a FINE cartridge. The machine may not print properly if you affect them.
If you remove a FINE cartridge, replace it immediately. Do not leave the machine with the FINE cartridge removed.
Use a new FINE cartridge for replacement. Installing a used FINE cartridge may cause the nozzles to clog.

Furthermore, with such a FINE cartridge, the machine volition not be able to inform you when to replace the FINE cartridge properly.
Once a FINE cartridge has been installed, practise non remove information technology from the machine and leave it out in the open. This will cause the FINE cartridge to dry out, and the auto may not operate properly when it is reinstalled. To maintain optimal printing quality, apply a FINE cartridge within six months of first use.

Note

If a FINE cartridge runs out of ink, you can print with either color or blackness FINE cartridge, in whichever ink remains, only for a while. Nonetheless the impress quality may exist reduced compared to when printing with both cartridges. We recommend to use a new FINE cartridge in guild to obtain optimum qualities.

Even when press with one ink only, print with leaving the empty FINE cartridge installed. If either of the color FINE cartridge or black FINE cartridge is not installed, an error occurs and the machine cannot impress. For information on how to configure this setting, see beneath.
- Setting the Ink Cartridge to be Used (Windows)
- Setting the Ink Cartridge to be Used (Mac Bone)
Color ink may be consumed even when printing a black-and-white document or when black-and-white printing is specified.

Both colour ink and black ink are as well consumed in the standard cleaning and deep cleaning of the print head, which may be necessary to maintain the performance of the machine.

When ink runs out, replace the FINE cartridge immediately with a new one.
- Ink Tips